Typical home improvement nibblers involve a simple attachment to a hand held drill device. You may get a quality cut on an aluminum can, but this is usually inappropriate for a quality nibbling job on metal. A hand held drill typically runs at half the power than most devices designed for work on various metals.

Get your metal work job done with the Bosch 1529B 18 Gauge Nibbler. It runs at 3.2 Amps, 2,500 SPM. Compare that with the power you merely get with a handheld drill using a nibbler attachment of 1.5 Amps of power.

This Bosch 1529B is designed to eject chips downward to keep the operator in safety. It gives you a 3-position choice orientation of forward, left and right. There is no need for adjustment to cut different thicknesses of metal.

The Bosch 1529B cuts flat stock, corrugated, trapezoidal, or full stock. Cuts most 0.8” aluminum, achieves a cutting radius of 1-9/16”, and cuts mild steel 18 ga. It is a nice light weight hand held item that weighs 3.9 lbs and is 11-1/4” long.

Priced at $330.64, you get a Nibbler from the Bosch company with worldwide reputation in manufacturing of power tools. Click here to purchase the Bosch 1529B 18 Gauge Nibbler

The Milwaukee 14” Abrasive Cut-Off Machine is the cheaper of its rivals, but yet it cuts with the same 15 Amp, 3900 RPM, 2400 Watt power. Unlike its competitors, it boasts a heavy cast-iron base for stability. It’s 14” cutting blade can drive through up to 5 inches of pipe material. Cut through angle iron, conduit pipe, channels, tubing, rebar, and drywall track with stability, accuracy and precision.

The product gives you a spindle lock so you can change the abrasive wheel. The rotation wheel prevents cutting particles from flying into your work area. Also, the rubber feet are located below the base to prevent access to sparks.

While its competitor boasts the ability of cutting more awkward jobs. The Milwaukee 14” Abrasive Cut-Off Machine weighs more than its competitor at 54 lbs which contributes more to its stable cutting claim. It is also smaller in dimension than its competitor, so its weight is more densely distributed for more stable cutting jobs. The saw’s arm locks in place when you want to transport safely.

Available for around $254, the Milwaukee 14″ Abrasive Cut-Off Machine the is a good electric tool to have around.

Engraving tools run in many shapes, sizes and prices, yet few offer the versatility to control the depth of engraving needed without vibration. The No.300 Actograph Electric Arc Engraver’s selling feature is its specially designed transformer to adjust and tweak the level of engraving needed. The item can run on either battery power or normal plug-in current. The product comes with six spare writing points. More are available for ordering as needed.

Another selling feature of the No.300 Actograph Electric Arc Engraver is its ability to engrave without vibration. This allows you more precision etching and engraving that vibration dependent engraving can’t give you.

The engraver will provide you etching and engraving ability through all hard and soft ferrous and non-ferrous surfaces.

Costing around $389.81, the No.300 Actograph Elec Arc Engraver can be purchased online here.

Having the Ancor Micro Electric Therm Heat Gun to do your daily work is really interesting. You can use this handheld heat gun for a wide variety of purposes. And its got a pretty ergonomic design with a smooth black exterior.

It works on a fuel cell which you can refill with butane at local refill locations as and when necessary. So that makes it really comfortable to work with. You can also check out the essential components included in the piezo electronic ignitions system which is designed for the simplest use. Ancor’s Micro Therm Heat Gun is really handy for making the best and simplest electrical repairs directly at a power source or from far away.

The piezo electronic ignition system included in the system provides an immediate flameless heat which has temperatures going up to 1300 degrees F (650 degrees C). And the heat gun has a wind proof system which provides instant heat in even the worst of weather conditions. Micro therm guns are designed for general heating and repair of plastics, to heat adhesives as well as potting compounds and a whole range. Priced reasonably at $27.31, the Ancor Micro Therm Heat Gun is a great purchase and can be bought online by clicking here.